Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Artesia, CA
Chimney repair in Artesia usually means dealing with a fireplace that hasn’t been used in years. Most of the homes here were built in the 1950s and 60s, and their original masonry chimneys have spent decades absorbing earthquakes, dry Santa Ana winds, and long stretches of neglect. Walnut Chimney has served Artesia since 2017, handling everything from cracked crowns to full liner replacements. When we get a call from a homeowner in the 90701 or 90702 ZIP code, the first thing we do is figure out whether the flue is still safe to use at all. Call (855) 341-3461 and we’ll walk you through what we’re seeing.
Why Artesia Homes Are Different
Artesia is a small, densely built city in the heart of the Gateway Cities region. It packs a lot of homes into roughly 1.6 square miles, and most of those homes are single-story stucco houses from the post-WWII boom. That means original brick or block masonry fireplaces built to 1950s standards, with mortar crowns that have been baking in the Southern California sun for six or seven decades. Those crowns crack. The bricks loosen. And because the climate is so mild, most fireplaces get used maybe five or six times a year, which means creosote buildup is rarely the main issue. Instead, we’re looking at animal nests, debris blown in during dry Santa Ana wind events, and the slow structural wear that comes from sitting dormant. In the older tracts near the 91 Freeway, it’s common to find chimneys with earthquake-damaged crowns and loose bricks that need repointing before a sweep can even be performed. That’s the direct legacy of the region’s seismic activity, and it changes the entire order of operations for a job here.
Styles & brands we work with
Our Main Artesia Services
Artesia homeowners call us most often about two things: getting a long-dormant fireplace back into safe working order, and clearing dryer vents that have been overlooked for years. Both are fire-safety issues, and both are handled by the same crew.
Chimney Sweep in Artesia
In Artesia, a chimney sweep is less about removing heavy creosote and more about clearing out what shouldn’t be there. Birds nest in unused flues. Santa Ana winds push twigs, leaves, and dust past missing or damaged spark arrestors. Before we sweep anything, we inspect the structure, because a chimney with earthquake-damaged mortar isn’t safe to brush until the masonry is stabilized. We’ve swept hundreds of Artesia chimneys since 2017, and the common thread is that the fireplace sat unused for years and needs a thorough assessment, not just a quick brushing. For the full breakdown of what a sweep involves here, see Chimney Sweep in Artesia.
Dryer Vent Cleaning in Artesia
The NFPA cites dryers as a leading cause of home fires, and in Artesia’s older single-story homes, dryer vents often run through walls or under floors where lint accumulates out of sight. We treat dryer vent cleaning as a core safety service, not an add-on, because a clogged vent turns a routine laundry load into a fire hazard. In Artesia’s dry climate, lint builds up fast and the vent runs are often longer than modern code allows, which makes the problem worse. We clean the full run from the dryer to the exterior termination. Details are on our Dryer Vent Cleaning in Artesia page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Artesia
Most chimney repair calls in Artesia start with the same discovery: the fireplace was fine for decades, then someone wants to use it again and notices cracked mortar, a rusted cap, or water staining around the ceiling. Homes built in the post-WWII boom have original masonry that’s now sixty-plus years old, and the dry climate doesn’t prevent damage, it just slows it down enough that the problems stay hidden until they’re serious. Earthquake-damaged crowns and loose bricks are especially common in the older tracts near the 91 Freeway, and a flue that hasn’t been inspected since the Reagan administration needs more than a sweep. Walnut Chimney handles everything from cap replacement to full relining, using professional-grade materials like DuraFlex and HeatShield so the repair matches the actual condition of the flue. Learn more about our full Chimney Repair capabilities.
Chimney Crown Repair
Signs you need it
You’ll see cracked or crumbling mortar on the flat concrete surface at the top of the chimney, often with water stains on the ceiling below or white efflorescence on the brick face.
What it costs in Artesia
Chimney crown repair in Artesia typically ranges from $350 to $950, depending on whether we’re sealing hairline cracks or rebuilding the crown entirely.
How we do it
We inspect the crown for structural cracks, clean out the damaged mortar, and apply a proper crown coat or rebuild it with the right mix so water stops getting in.
Chimney Cap Installation
Signs you need it
You can see daylight where the cap used to be, hear birds or animals in the flue, or find pieces of a rusted cap on the roof after a wind event.
What it costs in Artesia
A new chimney cap with installation in Artesia runs $250 to $600, with stainless or copper options from Copperfield or Gelco depending on flue size and condition.
How we do it
We measure the flue opening, match a cap that fits the existing tile or liner, and secure it properly so it stays put through Santa Ana winds and keeps rain, birds, and debris out.
What Chimney Repair Costs in Artesia
| Item | Typical range in Artesia |
|---|---|
| Chimney crown repair | $350 – $950 |
| Chimney cap installation | $250 – $600 |
| Chimney liner installation (DuraFlex) | $1,800 – $4,500 |
Can you repair a chimney that hasn’t been used in years?
Yes. Most Artesia chimneys we repair have sat unused for a long time. We inspect the full flue, address any structural damage first, and only then recommend cleaning or relining if needed.
Do I need a new liner if my chimney was built in the 1950s?
Often, yes. Original clay tile liners from that era commonly have cracks from decades of heat cycling and seismic movement. We camera-inspect first and only recommend a DuraFlex liner if the existing one is actually compromised. Call (855) 341-3461 for an inspection.
Brands We Service in Artesia
We work with DuraFlex, HeatShield, and Copperfield components on Artesia jobs, which means we’re not forcing a single brand onto every repair. Parts for common cap and crown jobs are stocked locally, so most repairs don’t wait on long shipping times. See our brands for the full material list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Artesia, CA
| Service | Typical range in Artesia |
|---|---|
| Chimney sweep | $180 – $340 |
| Dryer vent cleaning | $120 – $250 |
| Chimney cap installation | $250 – $600 |
| Chimney cap replacement | $250 – $600 |
| Chimney crown repair | $350 – $950 |
| Chimney flashing repair | $300 – $700 |
| Chimney liner installation | $1,800 – $4,500 |
| HeatShield resurfacing | $1,500 – $3,500 |
What pushes a price up in Artesia is usually the age of the chimney. Earthquake-damaged crowns, loose bricks that need repointing before any cleaning can happen, and flues that need camera inspection before we touch them all add scope. We give you the full price before any work starts, so there’s no surprise when the job is done.
Neighborhoods We Serve in Artesia
We work throughout Artesia, from the older tracts near the 91 Freeway to the neighborhoods around Artesia Park and the commercial corridor along Pioneer Boulevard. Our crews are familiar with the housing patterns across the city, so we know what to expect from a chimney before we even ring the doorbell.
- Central Artesia
- Artesia Park area
- Pioneer Boulevard corridor
- South Artesia near the 91 Freeway
Response time in Artesia is typically one to two business days for chimney repair estimates, with sweeps and dryer vent jobs often available sooner.
Service Area – Cities Near Artesia
Walnut Chimney also serves homeowners in Cerritos, CA and La Palma, CA to the west, Hawaiian Gardens, CA to the south, and Norwalk, CA to the north. If you’re in one of those cities and dealing with a chimney or dryer vent problem, give us a call at (855) 341-3461.
Serving Artesia, CA — Our Local Coverage Area
We’re based in the Artesia area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Artesia
No. Because we serve the entire Gateway Cities region from a nearby base, most Artesia jobs get scheduled within one to two business days. Sweep and dryer vent appointments can usually be set even sooner. Call (855) 341-3461 and we’ll find the first available slot.
Most chimney repairs and cleanings don’t require a permit in Artesia. If you’re in an HOA, especially for cap or crown work visible from the street, we can provide the documentation your association needs before we start. We’ll flag any case where a permit might be necessary.
Don’t light a fire until it’s been inspected. Dormant chimneys in Artesia collect animal nests, debris, and often have structural damage from earthquakes. We inspect first, then recommend whether a sweep, repair, or both are needed. Call (855) 341-3461 to get on the schedule.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Artesia Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Luis Garcia"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Renee Mercer"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Justin Nguyen